Maya Object Attributes
Polygone
polyCone
Create (polyCone)
Name | Format | Comments |
---|---|---|
-height | linear | |
radius | linear | |
roundCap | boolean | |
subdivisionsAxis | int | |
subdivisionsCaps | int | |
subdivisionsHeight | int |
Set / Get (polyCone)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
paramWarn (Param Warn) | bool | |
uvSetName (Uv Set Name) | string | |
radius (Radius) | doubleLinear | |
height (Height) | doubleLinear | |
subdivisionsAxis (Subdivisions Axis) | long | |
subdivisionsHeight (Subdivisions Height) | long | |
subdivisionsCap (Subdivisions Cap) | long | |
texture (Texture) | bool | |
createUVs (Create UVs) | enum | |
roundCap (Round Cap) | bool |
polyCube
Create (polyCube)
Name | Format | Comments |
---|---|---|
-depth | linear | |
height | linear | |
subdivisionsDepth | int | |
subdivisionsHeight | int | |
subdivisionsWidth | int | |
width | linear] |
Set / Get (polyCube)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
paramWarn (Param Warn) | bool | |
uvSetName (Uv Set Name) | string | |
width (Width) | doubleLinear | |
height (Height) | doubleLinear | |
depth (Depth) | doubleLinear | |
subdivisionsWidth (Subdivisions Width) | long | |
subdivisionsHeight (Subdivisions Height) | long | |
subdivisionsDepth (Subdivisions Depth) | long | |
texture (Texture) | enum | |
createUVs (Create UVs) | enum |
polyCylinder
Create (polyCylinder)
Name | Format | Comments |
---|---|---|
-height | linear | |
radius | linear | |
roundCap | boolean | |
subdivisionsAxis | int | |
subdivisionsCaps | int | |
subdivisionsHeight | int] |
Set / Get (polyCylinder)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
paramWarn (Param Warn) | bool | |
uvSetName (Uv Set Name) | string | |
radius (Radius) | doubleLinear | |
height (Height) | doubleLinear | |
subdivisionsAxis (Subdivisions Axis) | long | |
subdivisionsHeight (Subdivisions Height) | long | |
subdivisionsCaps (Subdivisions Caps) | long | |
texture (Texture) | enum | |
createUVs (Create UVs) | enum | |
maya70 (Maya 70) | bool | |
roundCap (Round Cap) | bool |
polyPlane
Create (polyPlane)
Name | Format | Comments |
---|---|---|
-height | linear | |
subdivisionsHeight | int | |
subdivisionsWidth | int | |
width | linear |
Set / Get (polyPlane)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
binMembership (Bin Membership) | string | |
output (Output) | mesh | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
paramWarn (Param Warn) | bool | |
uvSetName (Uv Set Name) | string | |
width (Width) | doubleLinear | |
height (Height) | doubleLinear | |
subdivisionsWidth (Subdivisions Width) | long | |
subdivisionsHeight (Subdivisions Height) | long | |
texture (Texture) | enum | |
createUVs (Create UVs) | enum |
polySphere
Create (polySphere)
Name | Format | Comments |
---|---|---|
-radius | linear | |
subdivisionsAxis | int | |
subdivisionsHeight | int |
Set / Get (polySphere)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
paramWarn (Param Warn) | bool | |
uvSetName (Uv Set Name) | string | |
radius (Radius) | doubleLinear | |
subdivisionsAxis (Subdivisions Axis) | long | |
subdivisionsHeight (Subdivisions Height) | long | |
texture (Texture) | enum | |
createUVs (Create UVs) | enum |
polyTorus
Create (polyTorus)
Name | Format | Comments |
---|---|---|
-radius | linear | |
sectionRadius | linear | |
subdivisionsAxis | int | |
subdivisionsHeight | int | |
twist | angle |
Set / Get (polyTorus)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
paramWarn (Param Warn) | bool | |
uvSetName (Uv Set Name) | string | |
radius (Radius) | doubleLinear | |
sectionRadius (Section Radius) | doubleLinear | |
twist (Twist) | doubleAngle | |
subdivisionsAxis (Subdivisions Axis) | long | |
subdivisionsHeight (Subdivisions Height) | long | |
texture (Texture) | bool | |
createUVs (Create UVs) | bool | |
reverseTexture (Reverse Texture) | bool |
Nurbs
cone
Create (cone)
Name | Format | Comments |
---|---|---|
-degree | int | |
endSweep | angle | |
heightRatio | float | |
radius | linear | |
sections | int | |
spans | int | |
startSweep | angle |
Set / Get (makeNurbCone)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
pivot (Pivot) | double3 | |
pivotX (Pivot X) | doubleLinear | |
pivotY (Pivot Y) | doubleLinear | |
pivotZ (Pivot Z) | doubleLinear | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
outputSurface (Output Surface) | nurbsSurface | |
radius (Radius) | doubleLinear | |
startSweep (Start Sweep) | doubleAngle | |
endSweep (End Sweep) | doubleAngle | |
useTolerance (Use Tolerance) | bool | |
degree (Degree) | enum | |
sections (Sections) | long | |
spans (Spans) | long | |
tolerance (Tolerance) | doubleLinear | |
heightRatio (Height Ratio) | double | |
topCapCurve (Top Cap Curve) | ||
bottomCapCurve (Bottom Cap Curve) | nurbsCurve | |
absoluteSweepDifference (Absolute Sweep Difference) | doubleAngle | |
useOldInitBehaviour (Use Old Init Behaviour) | bool |
cube
Create (nurbsCube)
Name | Format | Comments |
---|---|---|
-degree | int | |
heightRatio | float | |
lengthRatio | float | |
patchesU | int | |
patchesV | int | |
width | linear |
Set / Get (makeNurbCube)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
pivot (Pivot) | double3 | |
pivotX (Pivot X) | doubleLinear | |
pivotY (Pivot Y) | doubleLinear | |
pivotZ (Pivot Z) | doubleLinear | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
outputSurface (Output Surface) | nurbsSurface | |
width (Width) | doubleLinear | |
lengthRatio (Length Ratio) | double | |
heightRatio (Height Ratio) | double | |
patchesU (Patches U) | long | |
patchesV (Patches V) | long | |
degree (Degree) | enum | |
outputSurface1 (Output Surface 1) | nurbsSurface | |
outputSurface2 (Output Surface 2) | nurbsSurface | |
outputSurface3 (Output Surface 3) | nurbsSurface | |
outputSurface4 (Output Surface 4) | nurbsSurface | |
outputSurface5 (Output Surface 5) | nurbsSurface |
cylinder
Create (cylinder)
Name | Format | Comments |
---|---|---|
-degree | int | |
endSweep | angle | |
heightRatio | float | |
radius | linear | |
sections | int | |
spans | int | |
startSweep | angle |
Set / Get (makeNurbCylinder)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
pivot (Pivot) | double3 | |
pivotX (Pivot X) | doubleLinear | |
pivotY (Pivot Y) | doubleLinear | |
pivotZ (Pivot Z) | doubleLinear | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
outputSurface (Output Surface) | nurbsSurface | |
radius (Radius) | doubleLinear | |
startSweep (Start Sweep) | doubleAngle | |
endSweep (End Sweep) | doubleAngle | |
useTolerance (Use Tolerance) | bool | |
degree (Degree) | enum | |
sections (Sections) | long | |
spans (Spans) | long | |
tolerance (Tolerance) | doubleLinear | |
heightRatio (Height Ratio) | double | |
topCapCurve (Top Cap Curve) | nurbsCurve | |
bottomCapCurve (Bottom Cap Curve) | nurbsCurve | |
absoluteSweepDifference (Absolute Sweep Difference) | doubleAngle |
plane
Create (plane)
Name | Format | Comments |
---|---|---|
-length | linear | |
width | linear |
Set / Get (makeNurbPlane)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
pivot (Pivot) | double3 | |
pivotX (Pivot X) | doubleLinear | |
pivotY (Pivot Y) | doubleLinear | |
pivotZ (Pivot Z) | doubleLinear | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
outputSurface (Output Surface) | nurbsSurface | |
width (Width) | doubleLinear | |
lengthRatio (Length Ratio) | double | |
patchesU (Patches U) | long | |
patchesV (Patches V) | long | |
degree (Degree) | enum |
sphere
Create (sphere)
Name | Format | Comments |
---|---|---|
-degree | int | |
endSweep | angle | |
radius | linear | |
sections | int | |
spans | int | |
startSweep | angle |
Set / Get (makeNurbSphere)
Name | Format | Comments |
---|---|---|
caching (Caching) | bool | |
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
binMembership (Bin Membership) | string | |
pivot (Pivot) | double3 | |
pivotX (Pivot X) | doubleLinear | |
pivotY (Pivot Y) | doubleLinear | |
pivotZ (Pivot Z) | doubleLinear | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
outputSurface (Output Surface) | nurbsSurface | |
radius (Radius) | doubleLinear | |
startSweep (Start Sweep) | doubleAngle | |
endSweep (End Sweep) | doubleAngle | |
useTolerance (Use Tolerance) | bool | |
degree (Degree) | enum | |
sections (Sections) | long | |
spans (Spans) | long | |
tolerance (Tolerance) | doubleLinear | |
heightRatio (Height Ratio) | double | |
topCapCurve (Top Cap Curve) | ||
bottomCapCurve (Bottom Cap Curve) | ||
absoluteSweepDifference (Absolute Sweep Difference) | doubleAngle |
torus
Create (torus)
Name | Format | Comments |
---|---|---|
-degree | int | |
endSweep | angle | |
heightRatio | float | |
minorSweep | angle | |
radius | linear | |
sections | int | |
spans | int | |
startSweep | angle |
Set / Get (makeNurbTorus)
Name | Format | Comments |
---|---|---|
frozen (Frozen) | bool | |
isHistoricallyInteresting (Is Historically Interesting) | byte | |
nodeState (Node State) | enum | |
pivot (Pivot) | double3 | |
pivotX (Pivot X) | doubleLinear | |
pivotY (Pivot Y) | doubleLinear | |
pivotZ (Pivot Z) | doubleLinear | |
axis (Axis) | double3 | |
axisX (Axis X) | doubleLinear | |
axisY (Axis Y) | doubleLinear | |
axisZ (Axis Z) | doubleLinear | |
outputSurface (Output Surface) | nurbsSurface | |
radius (Radius) | doubleLinear | |
startSweep (Start Sweep) | doubleAngle | |
endSweep (End Sweep) | doubleAngle | |
useTolerance (Use Tolerance) | bool | |
degree (Degree) | enum | |
sections (Sections) | long | |
spans (Spans) | long | |
tolerance (Tolerance) | doubleLinear | |
heightRatio (Height Ratio) | double | |
topCapCurve (Top Cap Curve) | ||
bottomCapCurve (Bottom Cap Curve) | ||
absoluteSweepDifference (Absolute Sweep Difference) | doubleAngle | |
minorSweep (Minor Sweep) | doubleAngle |